View X42180_4992497.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Z-Power LED X10490 Technical Data Sheet
X42180
Z-Power series is designed for high current operation and high flux output applications. Z-Power LED's thermal management perform exceeds other power LED solutions. It incorporates state of the art SMD design and Thermal emission material. Z Power LED is ideal light sources for general illumination applications, custom designed solutions, automotive large LCD backlights
X42180
Features
* Super high flux output
and high luminance * Designed for high current operation * Low thermal resistance * SMT solderability * Lead free product * RoHS compliant
Applications
* Mobile phone flash * Automotive interior / Exterior lighting * Automotive signal lighting * Automotive forward lighting * Torch * Architectural lighting * LCD TV / Monitor backlight * Projector light source * Traffic signals * Task lighting * Decorative / Pathway lighting * Remote / Solar powered lighting * Household appliances
*The appearance and specifications of the product may be changed for improvement without notice.
Rev. 06 November. 2008 1 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Full Code of Z-Power LED Series
Full code form : X1 X2 X3 X4 X5 X6 - X7 X8 - X9 X10 X11 X12X13 1. Part Number - X1 : Color - X2 : Z-Power LED series number - X3 : LENS type - X4 : Chip quantity (or Power Dissipation) - X5 : Package outline size - X6 : Type of PCB 2. Internal Number - X7 - X8 3. Code Labeling - X9 : Luminous flux (or Radiant flux for royal blue) - X10 X11 X12 : Dominant wavelength (or x,y coordinates rank code) - X13 : Forward voltage 4. Sticker Diagram on Reel & Aluminum Vinyl Bag
PART NO. : X1 X2 X3 X4 X5 X6 - X7 X8 QUANTITY : ### LOT NUMBER : ########## BIN CODE : X10 X11 X12 X13 X14
For more information about binning and labeling, refer to the Application Note -1
Rev. 06 November. 2008 2 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Outline Dimension
1. Dome Type
SLUG
Cathode Mark
Lens
Body Lead
Notes : 1. All dimensions are in millimeters. (tolerance : 0.2 ) 2. Scale : none 3. Slug of package is connected to anode. *The appearance and specifications of the product may be changed for improvement without notice.
Rev. 06 November. 2008 3 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Characteristics for Z-Power LED
1. Pure White (W42180)
1-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter T rank U rank
[3]
Symbol V [2] V [2] CCT Ra
[4]
Value Min 70 91 2.9 Typ 80 100 6300 70 3.25 120 8.5 6.9 Max 91 4
Unit lm lm K V deg. C /W C /W
Luminous Flux
[1]
Correlated Color Temperature CRI Forward Voltage View Angle Thermal resistance Thermal resistance
[5] [6]
VF 2 1/2 RJ-B RJ-C
1-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity
[8]
Symbol IF Pd Tj Topr Tstg -
Value 1000 (@ Tj = 90 C)
[7]
Unit mA W C C C -
1800 (@ 1KHz, 1/10 duty) 4 145(@ IF 700mA) -40 ~ +85 -40 ~ +100 10,000V HBM
*Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5% tester tolerance. [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. (25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC. [7] IF Max is guaranteed under the TJ 90 C. [8] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink.
Rev. 06 November. 2008 4 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Characteristics for Z-Power LED
2. Warm White (N42180)
2-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Luminous Flux
[1] [3]
Symbol V [2] CCT Ra
[4]
Value Min 2.9 Typ 53 3000 93 3.25 124 8.5 6.9 Max 4
Unit lm K V deg. C /W C /W
Correlated Color Temperature CRI Forward Voltage View Angle Thermal resistance Thermal resistance
[5] [6]
VF 2 1/2 RJ-B RJ-C
2-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity
[7]
Symbol IF Pd Tj Topr Tstg -
Value 800 3.2 145 -40 ~ +85 -40 ~ +100 10,000V HBM
Unit mA W C C C -
*Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5% tester tolerance [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. .(25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink
Rev. 06 November. 2008 5 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Characteristics for Z-Power LED
3. Natural White (S42180)
3-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Luminous Flux
[1] [3]
Symbol V [2] CCT Ra
[4]
Value Min 2.9 Typ 61 4000 93 3.25 124 8.5 6.9 Max 4
Unit lm K V deg. C /W C /W
Correlated Color Temperature CRI Forward Voltage View Angle Thermal resistance Thermal resistance
[5] [6]
VF 2 1/2 RJ-B RJ-C
3-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity
[8]
Symbol IF Pd Tj Topr Tstg -
Value 800 3.2 145 -40 ~ +85 -40 ~ +100 10,000V HBM
Unit mA W C C C -
*Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5% tester tolerance. [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. (25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC. [7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink
Rev. 06 November. 2008 6 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Characteristics for Z-Power LED
4. Blue (B42180)
4-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Luminous Flux
[1]
Symbol V [2] D VF 2 1/2
[5] [6]
Value Min 455 2.9 Typ 22 465 3.25 130 8.5 6.9 Max 475 4
Unit lm nm V deg. C /W C /W
Dominant Wavelength[3] Forward Voltage View Angle Thermal resistance Thermal resistance
[4]
RJ-B RJ-C
4-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity
[7]
Symbol IF Pd Tj Topr Tstg -
Value 1000 4 145 -40 ~ +85 -40 ~ +100 10,000V HBM
Unit mA W C C C -
*Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 0.5nm for dominant wavelength [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. .(25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink 2. Blue power light sources represented here are IEC825 Class 2 for eye safety
Rev. 06 November. 2008 7 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Characteristics for Z-Power LED
5. Royal Blue (D42180)
5-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Radiant Power
[1] [3]
Symbol V [2] D VF 2 1/2
[5] [6]
Value Min 455 2.9 Typ 468 457 3.25 130 8.5 6.9 Max 460 3.8
Unit mW nm V deg. C /W C /W
Dominant Wavelength Forward Voltage View Angle Thermal resistance Thermal resistance
[4]
RJ-B RJ-C
5-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity
[7]
Symbol IF Pd Tj Topr Tstg -
Value 1000 4 145 -40 ~ +85 -40 ~ +100 10,000V HBM
Unit mA W C C C -
*Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5% tester tolerance [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. .(25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink 2. Blue power light sources represented here are IEC825 Class 2 for eye safety
Rev. 06 November. 2008 8 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Characteristics for Z-Power LED
6. Green (G42180)
6-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Luminous Flux Dominant
[1]
Symbol V [2] D VF 2 1/2
[5] [6]
Value Min 520 2.9 Typ 70 525 3.25 130 9.5 8.0 Max 535 4
Unit lm nm V deg. C /W C /W
Wavelength[3]
[4]
Forward Voltage View Angle
Thermal resistance Thermal resistance
RJ-B RJ-C
6-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity
[7]
Symbol IF Pd Tj Topr Tstg -
Value 1000 4 145 -40 ~ +85 -40 ~ +100 10,000V HBM
Unit mA W C C C -
*Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 0.5nm for dominant wavelength [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. .(25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sin
Rev. 06 November. 2008 9 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Characteristics for Z-Power LED
7. Red (R42180)
7-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Luminous Flux Dominant
[1]
Symbol V [2] D VF 2 1/2
[5] [6]
Value Min 618 2.0 Typ 48 625 2.3 130 9 7.8 Max 630 3.0
Unit lm nm V deg. C /W C /W
Wavelength[3]
[4]
Forward Voltage View Angle
Thermal resistance Thermal resistance
RJ-B RJ-C
7-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity
[7]
Symbol IF Pd Tj Topr Tstg -
Value 800 2.4 145 -40 ~ +85 -40 ~ +100 10,000V HBM
Unit mA W C C C -
*Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 0.5nm for dominant wavelength [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. .(25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink
Rev. 06 November. 2008 10 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Characteristics for Z-Power LED
8. Amber (A42180)
8-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Luminous Flux Dominant
[1]
Symbol V [2] D VF 2 1/2
[5] [6]
Value Min 585 2.0 Typ 48 590 2.3 130 9 7.8 Max 595 3.0
Unit lm nm V deg. C /W C /W
Wavelength[3]
[4]
Forward Voltage View Angle
Thermal resistance Thermal resistance
RJ-B RJ-C
8-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity
[7]
Symbol IF Pd Tj Topr Tstg -
Value 800 2.4 145 -40 ~ +85 -40 ~ +100 10,000V HBM
Unit mA W C C C -
*Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 0.5nm for dominant wavelength [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. .(25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink
Rev. 06 November. 2008 11 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Relative Spectral Power
Distribution
Relative Spectral Power
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Color Spectrum, TA=25C
1. Pure White
1 .0
S ta n d a r d e y e r e s p o n s e c u r v e
0 .8
0 .6
0 .4
0 .2
0 .0 300
400
500
600
700
800
900
W a v e le n g th ( n m )
2. Warm White
1 .0
0 .8
0 .6
0 .4
0 .2
0 .0 300 400 500 600 700 800
W a v e le n g th
Rev. 06 November. 2008 12 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Relative Spectral Power
Relative Spectral Power
Distribution
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Color Spectrum, TA=25C
3. Natural White
1 .0
0 .8
0 .6
0 .4
0 .2
0 .0 300 400 500 600 700 800
W a v e le n g th
4. Red, Amber, Green, Blue(Royal Blue)
1 .0
0 .8
0 .6
0 .4
0 .2
0 .0 400
500
600
700
W a v e le n g t h ( n m )
Rev. 06 November. 2008 13 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Relative Light Output(%)
Relative Light Output [%]
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Junction Temperature Characteristics
1. Relative Light Output vs. Junction Temperature at IF=350mA
120
100
80
60
40
20
0 25
Natural White, Warm White Pure White Blue(Royal Blue) Green
50 75 100
O
125
150
Junction Temperature( C)
100
80
60
40
20
Red Amber
0 25 50 75 100
o
125
150
Junction Temperature [ C]
14
Rev. 06 November. 2008 www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Forward Voltage Shift[V]
Dominant Wavelength Shift[nm]
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Junction Temperature Characteristics
2. Forward Voltage Shift vs. Junction Temperature at IF=350mA
0.0
-0.2
-0.4
-0.6
-0.8
Pure White, Warm White, Natural White, Blue(Royal Blue) Red Amber Green
25 50 75 100
O
-1.0 125 150
Junction Temperature [ C]
3. Wavelength Shift vs Junction Temperature at IF=350mA
12
10
Red Green Blue(Royal Blue) Amber
8
6
4
2
0 25 50 75 100
o
125
150
Rev. 06
Junction Temperature[ C]
15
November. 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Average Forward Current [mA]
Average Forward Current [mA]
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Forward Current Characteristics
1. Forward Voltage vs. Forward Current , TA=25 c
Blue(Royal Blue), Green, Pure White Warm White, Natural White
1000
800
600
400
200
0 0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Forward Voltage [V]
800 700 600 500 400 300 200 100 0 0.0
Red, Amber
0.5
1.0
1.5
2.0
2.5
3.0
Forward Voltage [V]
Rev. 06 November. 2008
16
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Relative Lumious Flux(a.U)
Relative Lumious Flux(a.U)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Forward Current Characteristics
2. Forward Current vs. Normalized Relative Luminous Flux, TA=25 c
2.5
Blue(Royal Blue), Green, Pure White Warm White, Natural White
2.0
1.5
1.0
0.5
0.0 0 200 400 600 800 1000
Forward Current [mA]
2.5
Red, Amber
2.0
1.5
1.0
0.5
0.0 0 200 400 600 800
Forward Current [mA]
Rev. 06 November. 2008 www.ZLED.com
17
Document No. : SSC-QP-7-07-24 (Rev.00)
Dominant Wavelength Shift[nm]
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Forward Current Characteristics
3. Forward Current vs Wavelength Shift, TA=25 c
8
6
Red Green Blue(Royal Blue) Amber
4
2
0
-2
-4 0 100 200 300
Forward current(mA)
400
500
600
700
800
900
1000
Rev. 06 November. 2008
18
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Current [mA]
Current [mA]
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Ambient Temperature vs Allowable Forward Current
1-1. Pure White, Warm White, Natural White, Green, Blue(Royal Blue) (TJMAX = 145 C, @350mA)
400 350 300 250 200 150 100 50 0
RjaT = 60 C/W RjaT = 50 C/W RjaT = 40 C/W RjaT = 30 C/W
o o o
o
0
25
50
75
100
o
125
150
Ambient Temperature [ C]
1-2. Pure White, Warm White, Natural White, Green, Blue(Royal Blue) (TJMAX = 145 C, @700mA)
800 700 600 500 400 300 200 100 0
RjaT = 35 C/W RjaT = 30 C/W RjaT = 25 C/W RjaT = 20 C/W
o o o
o
0
25
50
75
100
o
125
150
Ambient Temperature [ C]
Rev. 06 November. 2008
19
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Current [mA]
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Ambient Temperature vs Allowable Forward Current
1-3. Pure White, Green, Blue(Royal Blue) (TJMAX = 90 C, at 1000mA)
1200
1000
800
600
RjaT = 25 C/W RjaT = 20 C/W
o
o
400
200
0
0
25
50
75
100
o
125
150
Ambient Temperature [ C]
Rev. 06 November. 2008
20
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Current [mA]
Current [mA]
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Ambient Temperature vs Allowable Forward Current
1-4. Red, Amber (TJMAX = 145 C, at 350mA)
400
300
200
RjaT = 60 C/W RjaT = 50 C/W
100
o
o
RjaT = 40 C/W RjaT = 30 C/W
o
o
0
0
25
50
75
100
o
125
150
Ambient Temperature [ C]
1-5. Red, Amber (TJMAX = 145 C, @700mA)
800 700 600 500 400 300 200 100 0
RjaT = 60 C/W RjaT = 50 C/W RjaT = 40 C/W RjaT = 30 C/W
0 25 50 75 100
o
o
o
o
o
125
150
Ambient Temperature [ C]
Rev. 06 November. 2008
21
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Relative luminous flux
Relative Luminous Flux
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Typical Dome Type Radiation pattern
1. Pure White
0
1.0
30
0.8
0.6
60
0.4
0.2
0.0 -80 -60 -40 -20 0
90
Angle(deg.)
2. Warm White, Natural White
0
1.0
30
0.8
0.6
60
0.4
0.2
0.0 -80 -60 -40 -20 0
90
Angle(deg.)
Rev. 06 November. 2008
22
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Relative luminous flux
Relative luminous flux
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Typical Dome Type Radiation pattern
3. Blue(Royal Blue), Green
1.0
0 30
0.8
0.6
60
0.4
0.2
0.0 -80 -60 -40 -20 0
90
Angle(deg.)
4. Red, Amber
0
1.0
30
0.8
0.6
60
0.4
0.2
0.0 -80 -60 -40 -20 0
90
Angle(deg.)
Rev. 06 November. 2008
23
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Recommended Solder pad
1. Solder pad
2. Solder paste pattern
Note : 1. All dimensions are in millimeters (tolerance : 0.2 ) 2. Scale none *The appearance and specifications of the product may be changed for improvement without notice.
Rev. 06 November. 2008
24
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
150
~
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
3. Reflow Soldering Conditions / Profile
260 240 220 200
Tm : Reflow machine setting temp (max 30 sec.) Ts : Surface temp of PCB (max) Ts : Surface temp of PCB (recommend) Ts : Surface temp of PCB (min)
180
Pre-heating
Rising 5 C/sec
Cooling -5 C/sec
0 Time [Hr]
4. Hand Soldering conditions Lead : Not more than 3 seconds @MAX280 Slug : Use a thermal-adhesives
* Caution 1. Reflow soldering should not be done more than one time. 2. Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, suitable tools have to be used. 3. Die slug is to be soldered. 4. When soldering, do not put stress on the LEDs during heating. 5. After soldering, do not warp the circuit board. 6. Recommend to use a convection type reflow machine with 7 ~ 8 zones.
Rev. 06 November. 2008
25
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Emitter Type Reel Packaging
Note : 1. The number of loaded products in the reel is 500ea 2. All dimensions are in millimeters (tolerance : 0.2 ) 3. Scale none *The appearance and specifications of the product may be changed for improvement without notice.
Rev. 06 November. 2008
26
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Packaging Structure
Aluminum Vinyl Bag
PART NO. : ######-## QUANTITY : *** LOT NUMBER : #######-####### BIN CODE : #######
Outer Box
TYPE SIZE(mm) a 350 b 350 c 370
c ZLED
ZLED
PART : W42180-** PO CODE : ## Q'YT : ###### LOT NO : YMDD-##### DATE : ######
b a
SEOUL SEMICONDUCTOR CO.,LTD
Note : 1. 6~10 reels are loaded in box 2. Scale none 3. For more information about binning and labeling, refer to the Application Note - 1
Rev. 06 November. 2008
27
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
precaution for use
* Storage To avoid the moisture penetration, we recommend storing Z Power LEDs in a dry box (or desiccator) with a desiccant . The recommended storage conditions are Temperature 5 to 30 degrees Centigrade. Humidity 50% maximum. * Precaution after opening packaging However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40 Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, components should be dried for 10-12hr at 605 * Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. * Please avoid rapid cooling after soldering. * Components should not be mounted on warped direction of PCB. * Anti radioactive ray design is not considered for the products listed here in. * Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or shredded in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. * This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used. * When the LEDs are illuminating, operating current should be decided after considering the package maximum temperature. * LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. * The appearance and specifications of the product may be modified for improvement without notice. * Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. * The slug is connected to the anode. Therefore, we recommend to isolate the heat sink. * Attaching LEDs, don't use adhesives to generate organic vapor.
Rev. 06 November. 2008 www.ZLED.com
28
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Handling of Silicone resin LEDs
Z-Power LED is encapsulated by silicone resin for the highest flux efficiency. Notes for handling of Silicone resin Z-Power LEDs * Avoid touching silicone resin parts especially by sharp tools such as Pincette(Tweezers) * Avoid leaving fingerprints on silicone resin parts. * Dust sensitivity silicone resin need containers having cover for storage. * When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevent. * Please do not force over 2000 gf impact or pressure diagonally on the silicon lens. It will cause fatal damage of this product * Please do not recommend to cover the silicone resin of the LEDs with other resin (epoxy, urethane, etc)
Rev. 06 November. 2008
29
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)

▲Up To Search▲

Price & Availability of X42180

	To Download X42180 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .